Painted example is an illustration of the finished look.

Haunted House Pumpkin Painting Stencil

Add a name under it (optional)Prints as outline letters below the design, in the same PDF.

Choose your size

Smallabout 6 in tallMediumabout 9 in tallLargeabout 12 in tall

Or set design widthin

Not sure? Measure the smooth front of your pumpkin side to side with a tape or string. Pick a design width about two thirds of that.

Printed design: 4.5 × 5.4 in (11.4 × 13.7 cm)
Fits on 1 US Letter page.

Shown to scale on a pumpkin about 9 in tall.

4.5 in wide · 1 page · no sign-up

Printed too small or too big?

Your printer shrank the page to fit. Print again and change the scale:

Computer: in the print window, set Scale to 100% or pick "Actual size". Turn off "Fit to page".
Phone or tablet: open the PDF, tap Share, then Print. Turn off "Scale to fit" if you see it.

Then measure the 1-inch bar at the bottom of the page.

PrintPrint the PDF at 100% (Actual size). Check the 1-inch bar at the bottom of the page. No printer? Open the stencil full screen on a tablet, lay thin paper over it, and trace.
TraceShade the back with pencil, tape it to the pumpkin, and trace the outlines firmly with a pen.
PaintFill the large areas in black and yellow first. When dry, add the remaining details.